More Links

tranetwo · 09-18-2016, 01:30 PM

What does this setting mean in Options in NBA 2k17? . There are 3 sliders for it. Cant remember what they are called , but the setting is called Pass Target Profile.

rjohns23 · 09-20-2016, 11:56 PM

Yea I just seen it:

Pass target direction, pass target distance, and pass target openness.

It explains it but does not really go into detail. It has to do with how each section is weighted. The default setting is 55, 40, 5. Hopefully one of the Devs can explain it or we just may need to do some testing.

utexas · 09-21-2016, 05:40 PM

bump, I don't know what this does, does anybody know?

utexas · 09-21-2016, 05:44 PM

Directional pass targeting is very complex. Some people are often way more off with their left stick aiming than they think. Others want the system to be more "intelligent" and bias toward open teammates. The new sliders give you the ability to set the weighting exactly the way you want.

Direction = how much we weight the literal direction of where you're pointing the left stick

Openness = how much we weight the openness of the receivers in the general vicinity of where you're pointing (you'd want this higher to always get the roll man for example)

Distance = how much we weight toward always picking the closer teammates. this is good if you tend to get unwanted skip passes

found the answer in the Q&A thread

P234thetruth · 09-30-2016, 08:28 PM

Does anybody have any custom settings that they are liking that they want to share?

I had everything on default and it was bad I'd point one way and it'd go the opposite or I'd try to hit the roll guy and it goes complete the other way. I read the above but still don't know how much to tweak what.

Imbackandimbetter · 09-30-2016, 08:39 PM

Don't put distance and openness on 100, I can't even throw long passes, it goes right past the guy on the break or even someone close 80% of the time. I put it back on openness default but it always passes to someone that isn't 100% open very annoying.

SirGaryColeman · 09-30-2016, 08:52 PM

I'm a point forward, right now I use:

Direction 80
Distance 25
Openness 0

I don't trust the game to figure out how open someone is over me, so I put it at 0.

I still don't know if I like my setting for direction or distance, though. What is everyone using? What do you think the best setting would be for a passer (especially if I like to use flashy passes and lobs)?

P234thetruth · 10-19-2016, 10:21 PM

I can't believe there isn't more discussion on this.

09-18-2016, 01:30 PM	#1
tranetwo Banned OVR: 0 Join Date: Jan 2016	Pass Target Profile What does this setting mean in Options in NBA 2k17? . There are 3 sliders for it. Cant remember what they are called , but the setting is called Pass Target Profile. hanzsomehanz likes this.

09-20-2016, 11:56 PM	#2
rjohns23 Pro OVR: 2 Join Date: Sep 2010	Re: Pass Target Profile Yea I just seen it: Pass target direction, pass target distance, and pass target openness. It explains it but does not really go into detail. It has to do with how each section is weighted. The default setting is 55, 40, 5. Hopefully one of the Devs can explain it or we just may need to do some testing.

09-21-2016, 05:40 PM	#3
utexas Greatness OVR: 32 Join Date: Jan 2003 Location: Dallas, Tx Posts: 4,870 Blog Entries: 3	Re: Pass Target Profile bump, I don't know what this does, does anybody know?

09-21-2016, 05:44 PM	#4
utexas Greatness OVR: 32 Join Date: Jan 2003 Location: Dallas, Tx Posts: 4,870 Blog Entries: 3	Re: Pass Target Profile Directional pass targeting is very complex. Some people are often way more off with their left stick aiming than they think. Others want the system to be more "intelligent" and bias toward open teammates. The new sliders give you the ability to set the weighting exactly the way you want. Direction = how much we weight the literal direction of where you're pointing the left stick Openness = how much we weight the openness of the receivers in the general vicinity of where you're pointing (you'd want this higher to always get the roll man for example) Distance = how much we weight toward always picking the closer teammates. this is good if you tend to get unwanted skip passes found the answer in the Q&A thread VictorMG, jyod21, NINJAK2 and 2 others like this.

09-30-2016, 08:28 PM	#5
P234thetruth MVP OVR: 0 Join Date: Jul 2014	Re: Pass Target Profile Does anybody have any custom settings that they are liking that they want to share? I had everything on default and it was bad I'd point one way and it'd go the opposite or I'd try to hit the roll guy and it goes complete the other way. I read the above but still don't know how much to tweak what.

	New OS Forums Are Coming on May 1
	The Best Sports Gaming Year of All-Time
	Arcade Sports Games Need a Revival

09-30-2016, 08:39 PM	#6
Imbackandimbetter Rookie OVR: 0 Join Date: Aug 2016	Re: Pass Target Profile Don't put distance and openness on 100, I can't even throw long passes, it goes right past the guy on the break or even someone close 80% of the time. I put it back on openness default but it always passes to someone that isn't 100% open very annoying.

09-30-2016, 08:52 PM	#7
SirGaryColeman Banned OVR: 0 Join Date: Oct 2015	Re: Pass Target Profile I'm a point forward, right now I use: Direction 80 Distance 25 Openness 0 I don't trust the game to figure out how open someone is over me, so I put it at 0. I still don't know if I like my setting for direction or distance, though. What is everyone using? What do you think the best setting would be for a passer (especially if I like to use flashy passes and lobs)?

10-19-2016, 10:21 PM	#8
P234thetruth MVP OVR: 0 Join Date: Jul 2014	Re: Pass Target Profile I can't believe there isn't more discussion on this.